lemon-mirror:
Home >> Toyota >> 2007 >> Tacoma X-Runner >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1GR-FE) >> Throttle Body >> Installation

Throttle Body: Installation

  1. INSTALL THROTTLE WITH MOTOR BODY ASSEMBLY 
    1. Install a new gasket and the throttle with motor body with the 4 bolts.

      Torque: 11 N*m (112 kgf*cm, 9 ft.*lbf) 

    2. Connect the throttle motor connector.
    3. Connect the water by-pass hose No. 4.
    4. Connect the water by-pass hose No. 5.
  2. INSTALL AIR CLEANER ASSEMBLY 
    1. Install the air cleaner with the 2 bolts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Connect the ventilation hose No. 2.
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

  4. ADD ENGINE COOLANT  (See REPLACEMENT )
  5. CHECK FOR ENGINE COOLANT LEAKAGE  (See REPLACEMENT )
  6. INSTALL V-BANK COVER 
    1. Install the V-bank cover with the 2 nuts.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

· About lemon-mirror