lemon-mirror:
Home >> Toyota >> 2008 >> Highlander Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
    2. Install the crankshaft position sensor with the bolt.

      Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf) 

    3. Connect the crankshaft position sensor connector.
      4. Fig 1: Locating Crankshaft Position Sensor With Bolt
      G05245825Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT FENDER APRON SEAL RH 
  3. INSTALL FRONT FENDER LINER RH 
  4. INSTALL NO. 1 ENGINE UNDER COVER  (See INSTALLATION )
· About lemon-mirror