lemon-mirror:
Home >> Toyota >> 2008 >> Highlander Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Integration Relay >> Removal

Integration Relay: Removal

  1. REMOVE NO. 1 RELAY BLOCK COVER 
  2. REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the engine room junction block assembly.
      Fig 1: Identifying Engine Room Junction Block Assembly
      G05625779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 4 connectors.
      3. Fig 2: Locating Engine Room Junction Block Assembly Connectors
      G05415082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror