VVT Sensor: Installation

INSTALL VVT SENSOR (for Bank 1)
1. Apply a light coat of engine oil to the O-ring on the VVT sensor.
2. Install the VVT sensor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the VVT sensor connector.
  
  Fig 1: Locating VVT Sensor Bolt And Connector (For Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 2)
1. Apply a light coat of engine oil to the O-ring on the VVT sensor.
2. Install the VVT sensor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the VVT sensor connector.
  
  Fig 2: Locating VVT Sensor Bolt And Connector (For Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the heated oxygen sensor connector (Bank 2) to the wire harness bracket.
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 2 ENGINE ROOM SIDE COVER LH (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )