lemon-mirror:
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Engine Switch >> Removal

Engine Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH  (See REMOVAL )
  4. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
      Fig 1: Locating Switch Connector
      G05638343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws and remove the switch.
· About lemon-mirror