lemon-mirror:
Home >> Toyota >> 2008 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator position sensor connector [A].
    2. Remove the 2 bolts [B], then remove the accelerator pedal.
    Fig 1: Identifying Accelerator Pedal Assembly
    G05192750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror