Front Speed Sensor: Installation

INSTALL FRONT SPEED SENSOR
1. Install the front speed sensor with the bolt.
  Torque: 8.3 N.m (85 kgf*cm, 73 in.*lbf)
  
  NOTE: Make sure that the sensor tip is clean.
2. Connect the speed sensor connector.
INSTALL FRONT WHEEL
Torque: 113 N.m (1152 kgf*cm, 83 ft.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf*cm, 35 in.*lbf)

(See PRECAUTION ).
CHECK VSC SENSOR SIGNAL (w/VSC)
(See TEST MODE PROCEDURE )
CHECK ABS SENSOR SIGNAL (w/o VSC)
(See TEST MODE PROCEDURE )

Fig 1: Locating Speed Sensor Connector With Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002