SFI System: Precaution
- INITIALIZATION NOTE:
- Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (See PROBLEM SYMPTOMS TABLE ).
- Perform the REGISTRATION (VIN registration) when replacing the ECM (See REGISTRATION ).
- If the ECM has been replaced or RESET MEMORY (AT initialization) has been performed, set up the function of the ATF (Automatic Transmission Fluid) temperature warning light (See PROBLEM SYMPTOMS TABLE ).
HINT:
Initialization can not be completed by only removing the battery.
- FOR USING TECHSTREAM CAUTION: Observe the following items for safety reasons:
- Read its instruction books before using the tester.
- Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
- When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.