lemon-mirror:
Home >> Toyota >> 2009 >> FJ Cruiser RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Rear Speed Sensor >> Removal

Rear Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE REAR WHEEL 
  3. REMOVE REAR SPEED SENSOR 
    1. Disconnect the skid control sensor wire.
    2. Remove the nut and rear speed sensor.
      NOTE:
      • Do not attach any foreign matter to the sensor tip.
      • Ensure that no foreign matter enters the sensor installation part.
        Fig 1: Identifying Rear Speed Sensor Wire Connector And Bolt
        G05112384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror