lemon-mirror:
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator >> Removal

Charging Systems: Generator: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL )
  5. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH  (See REMOVAL )
  6. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH  (See REMOVAL )
  7. REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY  (See REMOVAL )
  8. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  9. REMOVE FRONT FENDER APRON SEAL FRONT RH  (See REMOVAL )
  10. DISCONNECT VANE PUMP ASSEMBLY  (See REMOVAL )
  11. DISCONNECT OIL COOLER PIPE ASSEMBLY  (See REMOVAL )
  12. REMOVE GENERATOR ASSEMBLY 
    1. Disconnect the generator connector.
    2. Remove the terminal cap and nut, and disconnect the generator wire.
    3. Remove the bolt and wire harness bracket from the generator.
      Fig 1: Locating Generator Assembly Connector
      G05639294Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 3 bolts, nut and generator.
      Fig 2: Locating Generator Bolts And Nut
      G05639295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror