lemon-mirror:
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Transmission >> Transfer Case -JF2A >> Transfer Assembly >> Installation

Transfer Assembly: Installation

  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer with the 8 bolts.

    Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

    NOTE: Take care not to damage the adaptor oil seal with the transfer input shaft spline.
    Fig 1: Locating Transfer Adaptor Rear Mounting Bolts
    G05629599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY 
    1. Install the automatic transmission with transfer assembly (See INSTALLATION ).
  3. ADD TRANSFER OIL  (See REPLACEMENT  )
  4. CHECK FOR TRANSFER OIL LEAK 
· About lemon-mirror