Rear Speed Sensor: Installation

INSTALL REAR SPEED SENSOR
1. Install the rear speed sensor with the nut.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  NOTE: Make sure that the sensor tip is clean.
2. Connect the speed sensor connector.
Fig 1: Locating Rear Speed Sensor Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
CHECK VSC SENSOR SIGNAL (for Hydraulic Brake Booster)
(See TEST MODE PROCEDURE )
CHECK VSC SENSOR SIGNAL (for Vacuum Brake Booster)
(See TEST MODE PROCEDURE )