lemon-mirror:
Home >> Toyota >> 2011 >> FJ Cruiser RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Front Speed Sensor >> Installation >> Installation

Front Speed Sensor: Installation: Installation

  1. INSTALL FRONT SPEED SENSOR 
    1. Install the front speed sensor with the bolt.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

      NOTE:

      Make sure that the sensor tip is clean.

    2. Connect the skid control sensor connector.
  2. INSTALL FRONT WHEEL 

    Torque: 112 N*m (1137 kgf*cm, 82 ft.*lbf) 

  3. CHECK VSC SENSOR SIGNAL 

    Refer to TEST MODE PROCEDURE

· About lemon-mirror