lemon-mirror:
Home >> Toyota >> 2012 >> Highlander Limited, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Service Information) (2GR-FE) >> Knock Sensor >> Inspection >> Inspection

Knock Sensor: Inspection: Inspection

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Knock Sensor
      GTY144853Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock control sensor.

· About lemon-mirror