lemon-mirror:
Home >> Toyota >> 2013 >> Prius Two >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) (Except Plug-In) >> Power Switch >> Installation >> Installation

Power Switch: Installation: Installation

  1. INSTALL POWER SWITCH 
    1. Engage the 2 claws to install the power switch.
      Fig 1: Identifying Power Switch & Claws
      GTY233733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 27
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH  . Refer to INSTALLATION - Step 28
  4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 30
  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY  . Refer to INSTALLATION - Step 31
  6. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL 
  7. INSTALL REAR NO. 3 FLOOR BOARD  . Refer to INSTALLATION - Step 58
  8. INSTALL REAR DECK FLOOR BOX  . Refer to INSTALLATION - Step 59
  9. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type)  . Refer to INSTALLATION - Step 60
· About lemon-mirror