| Enable Criteria |
Criteria to be met to enable the DTC monitoring conditions
- "Ignition is switched on = True & Ignition is switched on or the system is in "After run" = True & Battery voltage >= 9 V & Battery voltage <= 16 V"
|
| Failure Criteria |
Criteria to be met for the DTC to fail/set
- "A failure is detected if 5V supply chip of torque sensor is out of range 4.65~5.35V in current driving cycle"
|
| Failure/Mature Time |
Time required for the failure criteria to be met for the DTC to set
|
| Pass Criteria |
Criteria to be met for the DTC to pass/clear to history status
- "Recover the sub signal's duty ratio to normal range 5%~95% and Restart ignition in 1 time continuous driving cycle. The failure is recovered."
|
| Pass/De-Mature Time |
Time required for the pass criteria to be met for the DTC to pass/clear to history status
|
| Failure Aging |
Criteria to be met to clear the DTC from history status
|