Cd Changer -R41-: Installing

-- Unclip the connector housing for the wire connection from the CD changer.

-- Slide the CD changer into the installation frame for the glove compartment and when doing this, guide the wire connection upward through the opening in the glove compartment.

-- Now slide the CD changer in further until it audibly engages.

-- Secure the upper connection -A- to the glove compartment with a cable tie -arrow- so that they cannot rattle. Cut off the extra cable tie length.

Fig 1: Disconnecting Harness Connector On Glove Compartment And Removing Cable Tie

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Reconnect the connector.

-- Reinstall the glove compartment.