Version 2

NOTE:

The oil level must always be in the A range at the pre-delivery inspection. So that the highest customer satisfaction can be reached.

The amount of oil used during an engine oil change from the service table is determined by trial, and is sufficient for the engine operation in all operating conditions. For all services the oil level must be adjusted if necessary if the customer requests it. This makes an additional filling possible to the specified oil change amount to the maximum limit on the dipstick. Due to tolerances and also to oil temperature and flow back time, different fill capacities are possible.

Fig 1: Identifying Oil Levels Shown On Different Dipstick Types

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A - Do not add oil.

B - Engine oil can be filled up to the -A- range.

C - Add oil. The oil level must be at least in the upper half of the measuring range -B-.

-- Drain or extract some of the oil if the oil level goes above the mark -A- to prevent damage to the catalytic converter.

-- If the oil level is under the mark -C-, Fill with oil a minimum of 0.5 liters. Refer to MAINTENANCE TABLES THROUGH MY 2020 for the oil specification.