lemon-mirror:
Home >> Volvo >> 1995 >> 850 Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - Non-Turbo >> Computerized Engine Controls >> Electronic Control Unit - Ignition >> Preliminary Check & Breakout Box Installation

Preliminary Check & Breakout Box Installation

  1. Turn ignition switch to OFF position. Distributor ignition ECU is located in right side of engine compartment. Remove ECU cover. Disconnect distributor ignition ECU connector. Visually inspect all terminal connector sleeves to ensure no terminals are damaged.
  2. To install breakout box, remove distributor ignition ECU. Press adapter onto distributor ignition ECU and pull lead upward through slot beside module. Press distributor ignition ECU, with adapter connected, into connector in bottom of ECU box. Connect breakout box to adapter 60-pin connector.
· About lemon-mirror