Engine Controls - System/Component Tests: Introduction

Before testing separate components or systems, perform procedures in BASIC TESTING article. Since all monitored components set a Diagnostic Trouble Code (DTC) if they malfunction, see appropriate articles; For Motronic 4.3L see TESTS W/CODES , For Motronic 4.4L see TESTS W/CODES .

NOTE: Testing individual components does not isolate shorts or opens. Unless stated otherwise in test procedure, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance. Use ohmmeter to isolate wiring harness shorts or opens.