Transmission - Control System & Fluids

• Clutch Slave Cylinder
  • Clutch Slave Cylinder, Replacing
    • Notes
    • Removal
      • Removing the Gearbox
      • Removing the Clutch Cylinder
      • Checking the Clutch Cylinder And the Throwout Bearing
    • Installation
      • Notes
      • Installing the Clutch Cylinder
      • Finishing
• Control System
  • Fault-Tracing Information
    • Checking the Gear System
    • Fault-Tracing Information
  • Transmission Control System, Replacing
    • Notes
    • Removal
      • Removing the Cable Harness
    • Installation
      • Notes
      • Installing the cable harness
• Fluids
  • Checking Transmission Oil Level
    • Notes
    • Preparations
    • Move the Gear Selector Through All Positions, Stopping In Each Position For Approximately 3 Seconds
    • Low Level (Topping Up)
      • Top Up With Oil Through the Dipstick Pipe
    • High Level (Overfilling)
      • Notes
      • Drain Off Oil
  • Resetting Transmission Fluid Change Counter
    • Notes
    • Test Driving the Transmission
    • Checking For Coolant In Oil
    • Information
      • Fault-Tracing Information
  • Resetting Adaptation
    • Resetting Adaptation And the Counter For "Transmission Oil Change"
• Internal Components
  • Checking Internal Components Of the Transmission
    • Checking Shift Solenoids
    • Checking the Line Pressure Solenoid SLT, SLC1, SLC2, SLC3, SLB1 And Lock-Up Solenoid SLU
    • Checking the Oil Temperature Sensor
    • Checking the Input And Output Speed Sensors For the Transmission
• Transmission Connectors
  • Connectors, Transmission, Disconnecting/Connecting (AW55-50 and AW50AWD)
    • Notes
    • Disassembly
    • Reassembly
    • Connectors, Transmission, Disconnecting/Connecting
      • Preparations
      • Disconnecting the Connectors
  • Connectors, Transmission, Disconnecting/Connecting (AW50/51 AWD)
    • Preparations
    • Removal