Rear Fender

Materials
Designation	Part number
2-component foam	3M 08463

NOTE:

Removal steps in this procedure may contain installation details.

Follow the instructions regarding welding; refer to WELDING, GENERAL .

Perform side section, exposing; see SIDE SECTION, EXPOSING .

Follow the instructions regarding doors and hatches; see DOORS AND HATCHES .

Use: 2-Component Foam, 3M 08463

Fig 1: Outer Rear Fender Weld Locations (1 Of 4)

Courtesy of VOLVO CARS CORPORATION

Fig 2: Outer Rear Fender Weld Locations (2 Of 4)

Courtesy of VOLVO CARS CORPORATION

Fig 3: Outer Rear Fender Weld Locations (3 Of 4)

Courtesy of VOLVO CARS CORPORATION

Fig 4: Outer Rear Fender Weld Locations (4 Of 4)

Courtesy of VOLVO CARS CORPORATION

Follow the instructions regarding body sealing, sealant schedule; refer to BODY SEAL, SEALING DIAGRAM .

Follow the instructions regarding corrosion protection; refer to RUSTPROOFING .

To install, reverse the removal procedure.