Rear Section

NOTE:

Some variation may occur. However, the essential information in the illustrations is always correct

Fig 1: View Of Symbol Numbers

Courtesy of VOLVO CARS CORPORATION

Explanation of symbols

As measured from center
As measured from one edge
Measurement is indicated from a cut marking

Fig 2: Identifying Symbol Number 3 Measurement From The Bottom Of The Recess

Courtesy of VOLVO CARS CORPORATION

Measurements are taken from the bottom of the recess.

If only one measuring point symbol is displayed, the symbol applies to both points. Otherwise the symbols are shown on each side of the dimension in the graphic.

Fig 3: Tailgate Opening Dimensions

Courtesy of VOLVO CARS CORPORATION

Fig 4: Rear Pan Dimensions

Courtesy of VOLVO CARS CORPORATION

Fig 5: C-Pillar Dimension

Courtesy of VOLVO CARS CORPORATION