Lower Control Arm With Variant Code RI01: Installation

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Install the nut.

Ensure that the vehicle is adapted to normal status. Refer to: NORMAL POSITION

Courtesy of VOLVO CARS CORPORATION

Adjust to the specified value.

Courtesy of VOLVO CARS CORPORATION

Install the screws.

Courtesy of VOLVO CARS CORPORATION

Tighten the bolts.

1. Torque:  Arm lower rear, to subframe (front mounting)
   • Stage 1: 90Nm
   • Stage 2: 90°
2. Torque:  Lower control arm rear to wheel knuckle (front mounting)
   • Stage 1: 140Nm
   • Stage 2: 90°
3. Torque:  Lower control arm rear to wheel knuckle (rear mounting)
   • Stage 1: 90Nm
   • Stage 2: 120°
4. Torque:  Arm lower rear, to subframe (rear mounting)
   • Stage 1: 140Nm
   • Stage 2: 150°

Courtesy of VOLVO CARS CORPORATION

Install the screw.

Tighten the screw.

Torque:  Rear shock absorber, to Lower control arm

• Stage 1: 90Nm
• Stage 2: 150°

Remove the Special Tool.

Courtesy of VOLVO CARS CORPORATION

Tighten the screw.

Torque:  Spring seat outer, to lower arm rear, 80Nm

VEHICLES EARLY VERSION 

Courtesy of VOLVO CARS CORPORATION

Adjust the hole with a file as necessary.

Courtesy of VOLVO CARS CORPORATION

Install the screw.

Torque:  M5, 5Nm

To install, reverse the removal procedure.