Lower Control Arm With Variant Code RI01: Removal

Remove relevant side rear wheel. Refer to: WHEELS

Set the vehicle to Inactive mode, described in user mode. Refer to: USAGE MODE

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Courtesy of VOLVO CARS CORPORATION

Remove the following items: 

1. Torque:  Rear stabilizer bar link to stabilizer bar, 80Nm
2. Torque:  Anti-roll bar to rear sub-frame, 35Nm

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Torque:  Spring seat outer, to leaf spring, 70Nm

Special Tool: 999 7560 Compression tool  

Courtesy of VOLVO CARS CORPORATION

Assemble the following items: 

1. Special Tool: 951 2911 Hydraulic piston  
2. Special Tool: 999 7560 Compression tool  

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque:  Rear shock absorber top mount, to Body, 70Nm

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Tighten the bolts.

Torque:  M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Place the component where indicated in the graphic.

Courtesy of VOLVO CARS CORPORATION

Install the nuts

Courtesy of VOLVO CARS CORPORATION

Adjust to the specified value.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Remove the marked part.