lemon-mirror:
Home >> Acura >> 1992 >> NSX Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Bleeding >> Relieving System Pressure

Relieving System Pressure

  1. Drain brake fluid from master cylinder and modulator reservoir. Remove Red bleed screw cap from maintenance bleed screw. See Figure .
  2. Using Bleeder "T" Wrench (07HAA-SG00100 or 07HAA-SG00101), loosen maintenance bleed screw 1/4 turn to release high pressure fluid into reservoir. Turn "T" wrench one complete turn to relieve remaining accumulator line pressure. Tighten bleed screw, and install Red cap.
· About lemon-mirror