Abs Pump Motor Relay

WARNING: This page is about a different car, the 1998 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.

Remove relay from underhood fuse/relay block next to left strut tower. See Figure . With relay disconnected, use DVOM to check continuity between relay terminals No. and 3. See Fig 2 . Continuity should not exist. Apply battery voltage across terminals No. 2 and 4. Continuity should exist between terminals No. 1 and 3. If continuity is not as indicated, replace relay.

Fig 1: Identifying Fail-Safe Relay & Gauge Relay Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying ABS Pump Motor Relay Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.