Both Mirrors
- Reconnect the power mirror switch connector, and check for voltage between the No. 1 terminal and body ground with the ignition switch ON (II) while operating the power mirror switch.
There should be battery voltage.
- If there is no battery voltage, check for:
- - blown No. 4 (7.5 A) fuse in the driver's under-dash fuse/relay box.
- - an open in the ORN wire.
- If there is battery voltage, go to step 5.
- If there is no battery voltage, check for:
- Check for voltage between the No. 2 terminal and body ground while operating the power mirror switch.
There should be less than 1 V.
- If there is more than 1 V, check for:
- - an open in the BLK wire.
- - poor ground (G601).
- If there is less than 1 V, check both mirrors individually as described in LEFT MIRROR and RIGHT MIRROR .
- If there is more than 1 V, check for: