lemon-mirror:
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (2.7L) >> Structural Collar/Cover >> Installation

Structural Collar/Cover: Installation

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, and 2003 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The collar must be tighten using this service procedure, as damage to collar and/or oil pan may occur.
  1. Install structural collar (Figure) using the following tightening sequence:
    1. Install the vertical  collar to oil pan bolts. Torque bolts initially to 1.1 N.m (10 in. lbs.).
    2. Install the horizontal  collar to transmission bolts and torque to 55 N.m (40 ft. lbs.).
    3. Starting with the center vertical bolts and working outward, final torque bolts to 55 N.m (40 ft. lbs.).
  2. Lower vehicle.
· About lemon-mirror