lemon-mirror:
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Impact Sensor >> Removal >> Front Impact Sensor

Front Impact Sensor

  1. Open hood, disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
  3. Remove the headlamp unit of the side in which you are replacing the sensor (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL) .
  4. Through the headlamp opening, remove the two mounting screws retaining the front impact sensor. See Fig 1.
    Fig 1: FRONT IMPACT SENSOR - REMOVE/INSTALL
    GC0002475Courtesy of DAIMLERCHRYSLER CORP.
    1 - FRONT IMPACT SENSOR RETAINING SCREWS
    2 - FRONT IMPACT SENSOR
    3 - CROSSMEMBER LOWER RADIATOR SUPPORT
    4 - FRONT IMPACT SENSOR ELECTRICAL CONNECTOR
    5 - FRAME RAIL RIGHT SIDE FRONT
  5. Disconnect electrical connector.
  6. Remove sensor from vehicle.
· About lemon-mirror