lemon-mirror:
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Speed Control) >> Switch >> Installation

Section 33 (Speed Control): Switch: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

The speed control switch is mounted to the back of the multi-function switch. See Figure.

  1. Position speed control switch to back of multi-function switch.
  2. Install switch mounting screw. See Figure. Refer to TORQUE  for specifications.

    Install multi-function switch.

  3. Plug pigtail electrical connector into instrument panel wiring harness. Be sure wires are not pinched. See Figure.
  4. Install negative battery cable to battery.
· About lemon-mirror