lemon-mirror:
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Overhead Console) >> Compass/Mini-Trip Computer >> Installation

Compass/Mini-Trip Computer: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the compass mini-trip computer module in the overhead console.
  2. Install the screws holding the compass mini-trip computer module in the overhead console.
  3. Connect the module electrical connector.
  4. Install the overhead console on the headliner(Refer to INSTALLATION  ).
  5. Connect the negative battery cable.
  6. Check CMTC module function.
    Fig 1: Removing Overhead Console Module
    G03564108Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: If a new module has been installed, the compass will have to be calibrated and the variance set. Refer to COMPASS VARIATION ADJUSTMENT  and COMPASS CALIBRATION  .
· About lemon-mirror