Signal Check Mode

When "Signal Check" is touched on the MDS service menu, the mode is switched to the SIGNAL CHECK mode, and the current values for following signals are displayed.

NOTE: When "RETURN" is touched on the SIGNAL CHECK mode screen, the SIGNAL CHECK mode ends, and the screen returns to the MDS service menu.

Fig 1: Signal Check Mode Screen Display

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

"Key position": Displays "ON" when the ignition key is in the ON position, and displays "ACC" when the ignition key is in the ACC position.
"ILL": Displays "ON" when the room light is illuminated, and "OFF" when the light is off.
"Shift position": Displays "R" when the position is in the R (reverse) position, "Except R" when the position is in other than the R (reverse) position, and "-" when the ignition key is OFF.
"Vehicle speed": Displays the vehicle speed.
"Battery voltage": Displays the power supply voltage inside the multi-center display.
"Fuel": When the fuel tank remaining amount is normal and the ignition key is in the ON position, displays the fuel amount by "0 - 100%". When the ignition key is in the OFF position or when the fuel amount is being judged or is abnormal, displays "-%".
"Temperature internal Display": Displays the internal temperature of multi-center display.