lemon-mirror:
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation/Driver Info >> Clock System >> Inspection >> Check Communication Circuit

Check Communication Circuit

COMMUNICATION CIRCUIT SPECIFICATION

Step Check Yes No
1. CHECK THE HARNESS BETWEEN CLOCK AND COMBINATION METER. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the harness of clock and combination meter.
  3. Measure the resistance between harness connectors of clock and combination meter.

    Connector & terminal 

    (i59) No. 5 - (i10) No. 18: 

 Is the resistance less than 10 ohm? Go to step 2  . Repair the wiring harness.
2. CHECK COMMUNICATION ERROR DISPLAY. 
  1. Connect all the disconnected connectors.
  2. Turn the ignition switch to ON.
  3. Check that the error code is displayed in odo/trip meter.
 Is the error code "Er xx" displayed in odo/trip meter? Check the communication circuit. < Ref. to , COMMUNICATION ERROR DISPLAY , INSPECTION, Combination Meter System. > Replace the clock body.
· About lemon-mirror