Wheel Alignment: Inspection: Notes

Check the following items before taking wheel alignment measurement.

Check items before taking wheel alignment measurement:

• tire air pressure
• unbalanced right and left tire wear, size difference
• tire run-out
• ball joint excessive play, wear
• tie rod end excessive play, wear
• wheel bearing excessive play
• right and left wheel base imbalance
• steering link part deformed, excessive play
• suspension part deformed, excessive play

  Check, adjust and measure the wheel alignment in accordance with procedures indicated in the figure:

  WHEEL ALIGNMENT PROCEDURE CHART SEQUENCE
  
  

  1. Wheel arch height (Front and Rear) Ref. to WHEEL ARCH HEIGHT , Inspection, Wheel Alignment.

  2. Camber (Front and Rear) Ref. to CAMBER , Inspection, Wheel Alignment.

  3. Caster (Front) Ref. to CASTER , Inspection, Wheel Alignment.

  4. Steering Angle Ref. to STEERING ANGLE , Inspection, Wheel Alignment.

  5. Front Wheel Toe-In Ref. to FRONT WHEEL TOE-IN , Inspection, Wheel Alignment.

  6. Rear Wheel Toe-In Ref. to REAR WHEEL TOE-IN , Inspection, Wheel Alignment.

  7. Thrust Angle Ref. to THRUST ANGLE , Inspection, Wheel Alignment.