lemon-mirror:
Home >> Subaru >> 2010 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission >> Forward Clutch Assembly >> Installation

Forward Clutch Assembly: Installation

  1. Select a washer. Ref. to ADJUSTMENT , Forward Clutch Assembly.
  2. Install the selected washer.
    Fig 1: Identifying Washer
    G06654568Courtesy of SUBARU OF AMERICA, INC.
  3. Install the forward clutch assembly.
    Fig 2: Identifying Forward Clutch Assembly
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  4. Install the thrust needle bearing.
    NOTE: Install the thrust needle bearing in the correct direction.
    Fig 3: Identifying Thrust Needle Bearing
    G06654571Courtesy of SUBARU OF AMERICA, INC.
  5. Install the intermediate case. Ref. to INSTALLATION , Intermediate Case.
  6. Install the transfer reduction driven gear assembly. Ref. to INSTALLATION , Transfer Reduction Driven Gear.
  7. Install the transfer clutch assembly. Ref. to INSTALLATION , Transfer Clutch.
  8. Install the rear drive shaft. Ref. to INSTALLATION , Rear Drive Shaft.
  9. Install the extension case. Ref. to INSTALLATION , Extension Case.
  10. Install the transmission to vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
· About lemon-mirror