lemon-mirror:
Home >> Suzuki >> 2004 >> Verona EX >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Front

Toe-In Adjustment: Front

  1. Measure toe-in and compare to WHEEL ALIGNMENT SPECIFICATIONS  . If toe-in is not within specification, go to next step.
  2. Loosen front toe-in adjusting nuts and rotate right and left outer tie rods by the same amount to align toe-in to specification. See Fig 1 and WHEEL ALIGNMENT SPECIFICATIONS  . In this adjustment, right and left tie rods should become equal in length.
  3. After adjustment, hold outer tie rod and tighten adjusting nut to specified torque. See TORQUE SPECIFICATIONS  . Reconnect outer tie rods to knuckle assemblies.
Fig 1: Adjusting Front Toe-In
G00296723Courtesy of SUZUKI OF AMERICA CORP.
· About lemon-mirror