lemon-mirror:
Home >> Toyota >> 1994 >> Supra 2JZ-GE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks (Turbo) >> Camshaft Position Sensor

Camshaft Position Sensor

  1. Disconnect electrical connector from camshaft position sensors. See Figure. Using ohmmeter, measure resistance between both electrical terminals of each camshaft position sensor.
  2. Replace camshaft position sensor if resistance is not 835-1400 ohms at 14-122°F (-10-50°C) on Nippondenso sensors, or 985-1600 ohms at 14-122°F (-10-50°C) on Aisan sensors. Reinstall electrical connector on camshaft position sensors.
· About lemon-mirror