Anti-Lock Control
- Component Location
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Special Tool(s)
- Inspection and Verification - Scan Tool Communications Check
- Inspection and Verification - Drive Cycle Test
- ABS Control Module Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Connector Reference and Terminal Readings
- Pinpoint Tests
- Pinpoint Test A: DTC B1317/B1318-Battery Voltage High/Low
- Pinpoint Test B: No Communication With The Module-Anti-Lock Brake Module
- Pinpoint Test C: Unable To Enter Self-Test
- Pinpoint Test D: DTC: C1220-Yellow Abs Warning Indicator Failure
- Pinpoint Test E: DTCS C1194, C1196, C1198, C1200, C1202, C1204, C1206, C1208, C1210, C1212, C1214, C1216-Isolation Valve, Dump Valve
- Pinpoint Test F: DTC: C1155-Left Front Anti-Lock Brake Sensor Input Circuit Failure
- Pinpoint Test G: DTCS: C1158, C1233- Left Front Anti-Lock Brake Sensor Input Signal Erratic/Missing
- Pinpoint Test H: DTC: C1145-Right Front Anti-Lock Brake Sensor Input Circuit Failure
- Pinpoint Test I: DTCS: C1148, C1234-Right Front Anti-Lock Brake Sensor Input Signal Erratic/Missing
- Pinpoint Test J: DTC:1230-Rear Anti-Lock Brake Sensor Input Circuit Failure
- Pinpoint Test K: DTCS: C1229, C1237-Rear Anti-Lock Brake Sensor Input Signal Erratic/Missing
- Pinpoint Test L: Soft Or Excessive Pedal Travel
- Pinpoint Test M: DTCS: C1095, C1096-Pump Motor Circuit Failure/Open Circuit
- Pinpoint Test N: DTCS: C1113, C1115, C1185-Internal Power Relay Failure
- Pinpoint Test O: DTCS C1184 - Abs System Timeout, C1222 - Wheel Speed Error (Dynamic)
- Pinpoint Test P: DTC: C1169-Excessive Dump Time
- Pinpoint Test Q: The Yellow Abs Warning Indicator Does Not Self Check
- Pinpoint Test R: The Traction Control Cannot Be Disabled/Is Inoperative
- Component Test - Intermittent Failures
- Removal And Installation